DECODEUR LokSound XL V4.0

DECODEUR LokSound XL V4.0

 

Manuel à télécharger: ici

 

Operational modes:NMRA/DCC with 14, 28, 128 speed steps and automatic RailComPlus® detection.
DCC 2-digit and 4-digit addresses. Up to 28 functions in DCC operation.
M4 data format with 128 speed steps and automatic recognition by appropriate command stations. Up to 16 functions in M4 operation
Digital Motorola® (old and new), up to 28 drivesteps in Motorola® mode. Up to 255 addresses in Motorola® mode. Up to 4 addresses for function keys F5 to F15.
Selectrix® operation with 31 speed steps. Extended functions for up to 8 function keys (suitable control station necessary).
Analogue DC and AC operation (deactivation possible).
Automatic recognition of the operating mode and the DCC drive step configuration.
Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake system
Reverse bit
Intelligent programming mode with Märklin® 6021®. Supporting programming modes for ROCO Lokmaus 2 and ROCO Multimouse.
Drive control bit:4.0A continuous load
Connection to DC-, AC-motors with permanent magnet
Noiseless, motor saving control with 40 / 20 kHz pwm frequency
Motor output protected against overload. Load control of the 5th generation (possible to deactivate) Dynamic Drive Control.
Function outputs:12 amplified outputs
max. 500mA load for each output
Total current for all function outputs ca. 2000mA. Outputs short circuit protected
4 servo outputs for common servos. 5V integrated power supply.
Control impulse generation for external smoke generators (KM-1, Massoth)
Inputs:3 digital inputs to trigger steam chuffs or sounds.
Sound unit:8 (!) individual sound channels
High power dual amplification with about 11 Watts output current
Soundfiles in the internal flash memory modifiable
Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives etc.
32 MBit sound memory (up to 276 seconds)
Connection for two independent loudspeakers
Total current decoder:7A total current
Energy buffering:Integrated ESU PowerPack
Communication:Full RailComPlus® integration. Full M4 integration. Susi interface.
Loudspeakers:Impedance 4-32 Ohms, 8 Ohms recommended.
Dimensions:51mm x 41mm x 14mm
Référence54500
MarqueESU
CatégorieAccessoires
EchelleAutre
PaysInconnu
EpoqueAutre
3 RailsNon
TypeDigital sound

199 €

Qté :


Produits inspirés par vos visites

Promotion

DECODEUR STANDARD DIGITAL +

Référence10231.02
MarqueLENZ
CatégorieAccessoires
EchelleHo
PaysInconnu
EpoqueAutre
3 RailsNon
TypeAutre

- 17 %24 € 20 €

Cet article a été ajouté au panier !
Continuer mes achatsVoir mon panier